Inclination / Link Mechanism：Radial + Axial Load + Moment Load Maintenance-Free

IKO Spherical Bushings are compact self-aligning spherical bushings with inner and outer rings in contact with the sphere, which can support a large radial load and a bi-directional axial load at the same time. There are many models of Spherical Bushings, but they are basically divided into steel-on-steel types and maintenance-free types according to the kind of sliding surfaces. Steel-on-steel Spherical Bushings have inner and outer rings of high-carbon chromium bearing steel, of which sliding surfaces are phosphate-treated and then dry-coated with molybdenum disulfide (MoS2). They can, therefore, operate with low torque, and have excellent wear resistance and large load capacity. They are especially suitable for applications where there are alternate loads and shock loads. They have wide applications mainly in industrial and construction machinery. Maintenance-free Spherical Bushings consist of an outer ring which has a special PTFE liner reinforced with copper alloy meshes on the sliding surface, and a spherical inner ring of which sliding surface has a hard chromium plating. Creep deformation due to compressive load is small, and wear resistance is superior. Thus, they are maintenance-free and can be used for extended periods of time without re-lubrication. They are especially suitable in cases where fixed directional loads are applied and are used mainly in food processing machines and construction machinery and in other applications in which the use of oil is undesirable or lubrication is not possible.

IKO PILLOBALLs are compact self-aligning spherical bushings which can support a large radial load and a bi-directional axial load at the same time. These bearings are available in the following types: insert, die-cast and lubrication-free, depending on the type of sliding surface. In the insert type, a spherical inner ring makes contact with a special copper alloy bushing with superior run-in properties. In the die-cast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc die-cast alloy. In the maintenance-free type, a spherical inner ring makes contact with a special self-lubricating PTFE liner. Smooth rotational and oscillatory motion can be achieved with superior anti-wear and load properties in each type. PILLOBALL Rod Ends have either a female thread in the body or a male thread on the body, so they can be easily assembled onto machines. They are used in control and link mechanisms in machine tools, textile machines, packaging machines, etc. The maintenance-free type is especially suitable for loading in one direction and is the best choice for machines where oil must be avoided, such as food processing machines, or machines which cannot be re-lubricated.